JACUZZI® PREMIUM Hot Tub Parts

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of different brands of tubs and there is a list below of...

This part is a Standard Balboa Heater M7 Sensor with a 31" wire found in Jacuzzi Premium J series 2016 to current.    Application Balboa Water Group Sensor Diameter 1/4" Wire Length 31" ...

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on Sundance tubs and is also on Jacuzzi...

This pump is a Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.0HP called 3.6, 1 Speed, 230V that measures about 3" across the threads with the output positioned at 9 o'clock.. The amperage is about 8.7 Amps on high speed.. Note: This Pump will Only Work in...

This pump is a Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.0HP called 3.6, 2SP, 230V that measures about 3" across the threads.. The amperage is about 8.6 Amps on high speed and 3.4 Amps on low speed and this pump will work as a one or speed pump.. Note:...

Brass Fitting that fits an 1/8" MPT Jacuzzi heater fitting on one side a 3/8" ID tube on the other side. I have seen these in Jacuzzi Premium Trombone Heaters to attach the heater to the bleeder system though there are many applications this can be used...

This pump is a Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.5HP, 1SP, 230V that measures about 3" across the threads.. The amperage is about 11.0 Amps on high speed and 3.5 Amps on low speed and this pump will work as a one or speed pump.. Note: This Pump...

This part is a 2 Terminal 50Amp Power Block found on many Control pack and board set ups..

This part is a Spaside Control for a Jacuzzi J-300 Series hot tub with an Oval 4-Button LED.. The button configuration is Up-Down-Light-Pump1 Jacuzzi topside LED control panel used on 1 pump J-200 models from 2005-2006 and J-300 models from 2002 to...

This filter fits Jacuzzi Premium Hot Tubs J-300, J-400 Series. It is 15 1/2" Tall and 6 5/8" Around and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads. There...

This 1.5HP Impeller fits a Jacuzzi Piranha 8 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 15.6-16.0 Amps on a 115V motor or 7.8-9.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on...