JACUZZI® PREMIUM Hot Tub Parts

This part is an Air Bleeder barbed plug and O-Ring for Jacuzzi and Sundance Piranah Pump Faces Only.. Hot Tub Pump Faces to bleed the air off the pump while filling the tub up.  This barb is usually replaced because the barb is broken off and...

This Part is a Volute Back with 4 mounts only for a Piranha Ther-Flo, Thera-Max  pump only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. Note: There are two different...

This Part is a Set of * Face Plate Screws for Piranha, Thera-Flo or Thera-Max pump faces only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. For other parts related to this...

This Part is a Volute Back with 8 mounts only for a Piranha Bracketless pump only. This Part is used mostly in Jacuzzi® and Sundance® hot tubs with this specific type of wet end and will not fit others. Note: There are two different versions of...

This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame found in some Sundance or Jacuzzi Hot Tubs.For the motor that is used with this bracket click this link: Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A,...

NOTE: This pump is currently out of stock will all vendors but some are on the way.. If you buy we will watch daily and ship the pump as soon as we get them.. This part is a 2.0 Horse Power 10.0/3.0 Amp (2) Speed 48 Frame Complete Baseless Bracketless...

This part is used to Test All Sensors On:LX-20, LX-25, LX-30, SUNDANCE 400, 600, 750, 800 and 850 Circuit Boards. It is able to Simulate a Working Temp Sensor, Hi-Limit and Flo-Switch for All the Circuit Boards Noted Above. It can be Considered a...

This item is a Replacement Waterfall Control 2 1/2" White Cap for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This cap measures about 2 1/2" Edge to Edge and the center hole is about 1"..   For the Cap...

This item is a Replacement Waterfall Control 2 1/2" Gray Knob for a 1 1/2" Waterfall or Neck Jet Control found on Jacuzzi Premium and other brands.. This Knob measures about 3 1/8" Edge to Edge and the center Square hole is about 1/2"..   ...

This part is a 2.5HP Impeller that fits some Piranha Wet Ends found on Sundance, Jacuzzi and other brand Hot Tubs.. Click Here for Seal and Other Part options for this impeller: (8) Mount Parts Impeller Type Closed Face Impeller Diameter OD 4-1/4" ...

This part is a 96" Hi Limit Sensor with the box style connectors.. This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880...

This part is a 22" Hi Limit Sensor with the box style connectors.. This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880...