Description
As Of 08-24-2021 We have these in stock ready to ship..
Pump, Circulation, Aqua-Flo CMHP, 1/15hp, 230v, 1-1/2" Side Discharge
This 230V Laing E-14 circulation pump is compact and lightweight, less than 5 lbs. The E14 consumes 40% less power than standard circulation pumps with 48 frame induction motors. It is whisper quiet and highly efficient requiring only 115 Watts of power. The Laing E-14 is specifically designed for water circulation and is sealed with captured O-ring design for the best possible seal. Built in DRY RUN protection is programmed into the software to help eliminate motor and pump damage if the pump is ran without water when not sufficiently primed or is air locked. Made with 1-1/2"mbt inlet/outlet which measure about 2 3/8" across the threads.
Note: This pump comes with a blank ended cord not an Amp plug end as shown in some of the pictures.
Features and Benefits:
- 40% more efficient than standard induction motors
- Variable Speed - PWM Controllable
- Electronically Commutated Motor (ECM)
- Shaftless, Sealless, and Leak Proof
- Dry Run Protection
- Electronic Speed Control
- Open Impeller - Resistant to Clogging
- Compact Design
Inlet | Outlet | Voltage | Wattage | Gallons Per Minute(GPM) |
1-1/2"mbt | 1-1/2"mbt | 230v | 115W | 40GPM |
Complete Pump Type | Circulation Pump |
Speed | 1 Speed (1-Spd) |
Motor Voltage | 230v |
Drain Plug Location | None |
Pump to Motor Foot Types | Footless |
Suction Style | Center |
Suction Connection (Physical Dimension) | 2-7/16" od |
Suction Connection Type | Male Buttress Thread (mbt) |
Suction Pipe Size | 1-1/2" |
Discharge Style | Side |
Discharge Connection (Physical Dimension) | 1-7/8" od |
Discharge Connection Type | Male Buttress Thread (mbt) |
Discharge Pipe Size | 1-1/2" |
Manufacturer | Laing Thermotech |
Pump Model | E-14 |
Volute Fastening Type | Lock Ring |