2" X 2 1/2" Aqua-Flo 230V 56 Frame Pumps

2" X 2 1/2" Aqua-Flo 230V 56 Frame Pumps

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Screw Kit for Pump Motor Base Base 48 & 56 Frame Note: We do offer this Screw kit with a Rubber Vibration Dampener in this Store..

    Screw Kit for Pump Motor Base Base 48 & 56 Frame

    HTPOFAmerica

    MSRP: $9.99
    $6.99
    This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs.  Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  For Most brands of hot tub pump motors, for...
    MSRP: $9.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $6.99
    Subtotal:
  • Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener

    Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener

    HTPOFAmerica

    MSRP: $23.99
    $17.99
    This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...
    MSRP: $23.99
    $17.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $23.99
    $17.99
    Subtotal:
  • An Example of a 230V (2) Speed Emerson motor wiring on the Motor End:
High Speed Red Wire goes on (H) for High Speed
Common or Neutral White Wires goes on (C) for Common or Neutral.. Note: In this case this wire would be Hot 115V..
Low Speed Black wire goes on (L) for Low Speed
Green goes on 1/4" Screw to the body cover... This is an example of a 2 speed AMP Plug..
Note: if this goes on a Motor that is 115V the white wire would be Neutral if it is 230V the white wire would be Hot 115V...
In these positions Red is normally High Speed, Black, Low, White Neutral and Green Ground..

    How To Wire a Hot Tub Pump Motor Correctly The Spa Guy

    Spa Guy How To Videos

    $0.00
    In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor... Save...
    $0.00
    Qty in Cart: 0
    Quantity:
    Price:
    $0.00
    Subtotal:
  • Example of Wet End at 9 o'clock Example of Wet End at 12 o'clock

    How To Turn a Pump Wet End to the Direction You Need The Spa Guy

    Spa Guy How To Videos

    $0.00
    This video is about The Spa Guy teaching you How To Turn a Pump Wet End to the Direction You Need it to be in to fit your hot tub... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save
    $0.00
    Qty in Cart: 0
    Quantity:
    Price:
    $0.00
    Subtotal:
  • How To Video Aqua Flo XP2e Leaking Pump Replace Seal Short Version Hot Tubs How To

    How To Video Aqua Flo XP2e Leaking Pump Replace Seal Short Version Hot Tubs How To

    Spa Guy How To Videos

    $0.00
    In this Video the Spa Guy show you how to install a 200 seal in an Aqua-Flo Wet End.. This is the seal only version... For the full version look in The Spa Guy's How To Video Library... Save Save Save Save Save Save Save Save Save Save Save Save Save...
    $0.00
    Qty in Cart: 0
    Quantity:
    Price:
    $0.00
    Subtotal:
  • Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener

    Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener

    HTPOFAmerica

    MSRP: $16.99
    $11.99
    This part is a Rubber Pump Motor Base Vibration Dampener for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base. This motor base mounting pad fits under any 48 frame pumps, and under most 56...
    MSRP: $16.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.99
    $11.99
    Subtotal:
  • Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins

    Drain Plug Adapter, Gecko, AquaFlo XP2, XP2E, 1/4" Barb x 1/4"Mpt, Bleeder, Watkins

    HTPOFAmerica

    MSRP: $13.99
    $9.99
    This part is a Pump Bleeder Barb with O-Ring that is found on some Aqua-Flo Xp2 and Xp2e wet ends but is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part does come with the...
    MSRP: $13.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $9.99
    Subtotal:
  • 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket... 2 5/8" Lip Hot Tub Spa 2" Heater  or Pump Union Gasket CMP Video How To
Note: This Gasket is the exception not the rule so be sure you measure the lip on the gasket 2 5/8" Center to Center and the groove in your union for the lip to fit in.. If it is 2 1/2" look for a regular 2: pump heater union gasket...

    2 5/8" Lip Hot Tub Spa 2" Heater or Pump Union Gasket CMP Video How To

    HTPOFAmerica

    MSRP: $7.99
    $4.99
    This Parts is a NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8" center to...
    MSRP: $7.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $7.99
    $4.99
    Subtotal:
  • 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder 3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder

    3/8" Clear Vinyl Tubing, 12" length for Air Manifold, Jet Body, Blower Jet, Pump Bleeder

    HTPOFAmerica

    MSRP: $3.99
    $2.99
    This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...
    MSRP: $3.99
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $3.99
    $2.99
    Subtotal:
  • Removing a Stuck Impeller on a Hot Tub Pump How To Spa Guy

    How To Video Removing a Stuck Impeller on a Hot Tub Pump Spa Guy

    Spa Guy How To Videos

    $0.00
    This video is about The Spa Guy showing You How To Remove a Stuck Pump Impeller...This technique is similar for all brands of pumps and motors... Save Save Save Save Save Save Save Save Save Save Save
    $0.00
    Qty in Cart: 0
    Quantity:
    Price:
    $0.00
    Subtotal:
  • How To Video Replacing an Aqua-Flo 200 seal and Impeller on a Hot Tub Pump Spa Guy

    How To Video Replacing an Aqua-Flo 200 seal and Impeller on a Hot Tub Pump Spa Guy

    Spa Guy How To Videos

    $0.00
    This video is about The Spa Guy showing You How To Replace a 200 style seal on an Aqua-Flo Pump and put the wet end back together... Save Save Save Save Save Save Save Save Save
    $0.00
    Qty in Cart: 0
    Quantity:
    Price:
    $0.00
    Subtotal:
  • How To Video Replacing Bearings on a Hot Tub Pump Aqua-Flo Spa Guy

    How To Video Replacing Bearings on a Hot Tub Pump Aqua-Flo Spa Guy

    Spa Guy How To Videos

    $0.00
    This video is about The Spa Guy showing You How To Replace Bearings on an Aqua-Flo Pump.. Bearing replacement is similar for all motors.. Save Save Save Save Save Save Save
    $0.00
    Qty in Cart: 0
    Quantity:
    Price:
    $0.00
    Subtotal:
  • Total: items /

Adding your products to cart