Description
The MODPACK 101 is a universal replacement spa control system. Heater assembly is 15″ long, it is mounted to the back of the enclosure. To simplify the replacement process, heater tube height is adjustable so it aligns to the existing plumbing. It is also detachable and can be plumbed with 3 feet from the control box. This pack is designed to run either (1) Pump, (2) Pumps or (1) pump and (1) Blower, a Light and an ozonator as well. It can be wired 115v or 230V and it comes with a new cable for both pumps, a light and an ozonator.. The topside is 5 3/8" x 2 1/2" on the face and the hole size for the topside would be about 4 3/4" x 1 3/4".. If the hole you are trying to use the topside is is larger than this we offer blackout plates to take up the space..
If you need a blackout plate click here.. Adapter Blackout Plate, Hydro-Quip 8-1/2" x 3-1/2". For Eco-401 or Balboa E4 Duplex Topside
If you need your ModPack to run Fiber Optic add this option.. Retrofit MODPACK Fiber Optic Option This is in Addition to a New Modpack purchase
- One pump circuit, two speeds, 110/220V, 12A Max
- Blower or Pump 2 circuit, 1-speed, 110/220V, 12A Max
- Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
- Ozone circuit, 110/220V, 1A Max
- 12V 12W Light circuit
- 1.4/5.5KW, 120/240V Flo-Thru heater
- Adjustable mount Stainless steel heater housing
- 48-inch amp motor, blower, and ozone cords
- Topside Panel Included
- UL and ETL Listed
- Freeze protection
- High-limit protection
- Filtration mode
- Economy Mode
- Pair of 2 inch Heater Tailpieces with O-Ring Gaskets
- 1-Year Limited Factory Warranty
