Shop

  This is a 1HP Seal & Impeller Kit for a Watkins 37334 Vendor Code# 4081 Pump with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Wavemaster 48 1.0HP Motor would be about 7-8.0 Amps on high speed at 230V or 11-12.0 Amps at...

This Kit is a Gray Buttress Notched 3 3/4" Spa Diverter Cap, Handle Knob, Stem & O-Rings only. This is a Buttress style Cap if your cap has the word Buttress stamped in it look in our store for a Non-Buttress cap. This Diverter Cap mounts...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation, see pic 2. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2...

This complete pump and motor is a Watkins Wavemaster 7000, 8000 or 9000 replacement, 39577 Code 06290, 115V or 230V, (1) Speed, 20.0Amp or 10.0Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep...

This part is a Replacement Watkins Water Check Valve that is 3/4"Barb x 3/4" Barb with Connect kit..  This kit is used to make the connection to existing 1/2" Flex pipe which measures about 3/4" outside diameter.. You slide the 1/2" flex into the...

Many of these Hurricane Jets are NO LONGER AVAILABLE.. We have a few of these left.. This part is a Complete Jet Internal, CMP, Hurricane, Hurricane, 5" face diameter, 14 Hole, Massage, Smooth, Stainless Steel Graphite Gray... The Waterway...

  This part is a Complete Jet Internal, CMP, Hurricane, Hurricane, 5" face diameter, 7 Hole, Smooth, Stainless Steel Graphite Gray... The Waterway 218-6610 Diffuser will not work on this jets though they look similar. This is another...

The part is a 1" x 3/4" - 3/4" Wye.. Manifold Wye

This part is no longer available.. But we have a solution.. The RENU Kit is a 1" x 3/4" - 3/4" Wye with reducer bushings 1" to 3/4" and 3/4" to 1/2" Along with related parts to make RENU Connections to old Flex pipe.. On the 3/4" Side it comes with a...

This part is no longer available.. But we have a solution.. The Kit is a 1" x 3/4" - 3/4" Wye with reducer bushings 1" to 3/4" and 3/4" to 1/2".. These bushings also make it easier to Spin It to Win It. Manifold Wye

// This part is a (2) Speed 56 Frame Complete Intertek Pump that fits Jacuzzi Premium or Sundance brand Hot Tubs that have a band style base mount. These pumps usually have the part number WUA-400-II, and then 6500-367 or 6500-365 or 6500-363 on...

This part is a 3HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0135 cast into the back and will measure about 4 1/8" wide with an eye width of 1 3/4" and a vane width of 1/2".. This can be found on motors with an...