Shop

You are buying an Oval 2 Pump & Blower Overlay that fits an Oval Balboa E8 with a Cat 5 Type plug end that uses only 6 or 7 of the buttons.  Note: These topsides do fail and usually the buttons to the left of the screen are what fails on...

You are buying an Oval 3 Pump Overlay that fits an Oval Balboa E8 with a Cat 5 Type plug end that uses only 6 or 7 of the buttons.  Note: These topsides do fail and usually the buttons to the left of the screen are what fails on either style of...

You are buying an Oval Topside that is a Balboa E8 with a Cat 5 Type plug end that uses only 7 of the buttons. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons... Note: These topsides do fail and...

This parts is a Replacement Pump Side J&J Plug on some 2 Speed Pumps.. Look at the configuration and be sure yours matches as there are several different configurations... This one is a Triangle shape on the Red, Black and White wires.. Male End...

This parts is a Replacement Control Side J&J Plug on some 2 Speed Pumps.. Look at the configuration and be sure yours matches as there are several different configurations... This one is a Triangle shape on the Red, Black and White wires.. This item...

This part is a Viking Topside, Balboa, E4 Oval, Jets, Jets, Temp, Light works for 1 or 2 Pump Systems 7' Long Cord. It has an 8 pin Cat 5 Phone Style plug and a cord that is 84" long to work with some Viking Brand hot tubs where the topside is on...

This part is a Clip that hold the  Jacuzzi Spa Trap, Mesh Skimmer Bag into place inside the filter housing. Fits most J-300 Series, 2002 and newer and here is a link to the filter for this tub too Jacuzzi Premium 2002+ Filter Skimmer Bag has 6 holes...

This item is a Gray Complete Suction Fitting that requires a 3 3/8" hole... The cover is 5 3/16" Wide... The plumbing size is 2" which would measure about 2 3/8" Outside Diameter of the pipe that glues in.. If your plumbing is 1 1/2" you would need a 2"...

This Filter is a 40 Square Foot Filter Cartridge for a Dynasty Hot Tub that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are...

This is a 4HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

This is a 4HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

You are buying a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo...