Shop

This part is a Complete Jet Internal, Waterway, Poly Jet, Caged Straight, Gray, 2" Face Width.. This Jet is similar to the Poly Jets with the face that slips in and out except it has no face just a body..  Jet Part Type Internal Manufacturer...

Jet Internal, Pentair, Cyclone Luxury, 4-1/8" face diameter, Pulse Nozzle, LS,, Textured, Gray This smiley face cut out in the back of the diffuser is a tell tale sign that your jet is a Cyclone Luxury Jet.. Installation Type Twist Lock Face...

Vico Ultimax Pump ImpellerClosed face impeller made for the Ultimax spa pump by Vico. Rated at 1.5hp,which would be 8-9.0 Amps.. it is used in an Ultimax pump wet end, and must be installed on a 1.5hp (or greater) thru bolt motor.  Click here for...

This part is a Threaded Poly Storm Jet Body with a 3/4" Barb.. You would seal this with Silicon along with a gasket.. Hole size is about 2 5/8"  This part is a replacement for an obsolete Jet body but you will have to replace the jet as well to...

This part is a Slice, Gate Valve, Waterway, 2-1/2" Slip x 2-1/2" Spigot, Coast Spas and Others... The OD of the Street Spigot side measures about 2 7/8" and the ID of the Slip side measures about 2 7/8"..   This is a very unusual valve and an odd...

This tool can be used to crimp amp pins, strip wires, crimp other solderless connectors and crimp caps as well as wire cutting..   Tool Type Group Electrical Tool Type Crimping, Amp Tool Application Electrical Manufacturer Newark The...

This part is no longer available.. This part is a 5 pin Male side Amp connector 20 Amp . This part is normally found on the Cord side that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...

This part is a 5 pin female side Amp connector 20 Amp . This part is normally found on the control pack side mounted for the male amp cord that would come from a pump or blower or other accessory. Note: You will need a pin tool to replace this part to...

This part is the Control Box Board Side Female AMP Connector that houses (2) Female Pins.. The Pins are not included.. This connector is used often on light cables.. Terminal Type AMP Terminal Style AMP Plug Housing Female Number of Connections 2 ...

This part is a 2.5HP Impeller that fits some Piranha Wet Ends found on Sundance, Jacuzzi and other brand Hot Tubs.. Click Here for Seal and Other Part options for this impeller: (8) Mount Parts Impeller Type Closed Face Impeller Diameter OD 4-1/4" ...

This part is a Complete Topside with the overlay and the wire for an Aeware IN.XE System with (1) Pump, Light, Temp Up and Down.. .. The in.k200 is a compact control panel designed to be used with the IN.XE Aeware by Gecko control system. This series of...

This part is an Overlay for a IN.XE K-200 Topside that features 4 buttons (2) pump, (1) Light, Temp.. The dimensions of the topside it fits is Dimensions 2" x 4-3/4"... For the One Pump Version Complete Topside Click here: Topside, Aeware, In.k200, 4...