Shop

This part is a Complete FMHP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V...

This Waterway 2.0hp Ex2 Pump is 230v, 2-spd, 48fr, 9.0A, 2"x 2" and it is a perfect XP2 Replacement.. This is Waterways answer to an Xp2 pump.. Manufacturer Waterway Pump Model EX2 Speed 2 Speed (2-Spd) Motor Voltage 230v Drain Plug Location...

Manifold/Barb Fitting

// As Of 08-24-2021 We have these in stock ready to ship..    Pump, Circulation, Aqua-Flo CMHP, 1/15hp, 230v, 1-1/2" Side Discharge   This 230V Laing E-14 circulation pump is compact and lightweight, less than 5 lbs. The E14...

You are buying a 1" FTB X 3/4" Barb Pump Union with O-ring that matches the Union.The Union receives a 3/4" Inside Diameter Hose which measures about 1" on the outside and then Screws to a 1" Wetend (Pump) Threaded Part on the other side the threads will...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

This is the Ninja whirlpool bath pump from CMP. Used by many tub makers over the years. 115v, 10.0 Amps, comes with air switch and 36" Nema cord. Also available in other amperages. Length Width Discharge Height Overall Height 13.64" 5.35" 6.75" 7...

T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repairActionCoilAmpsSPST12 VDC30amp

Balboa InstrumentsStainless steel replacement heater assembly. 2" x 15" manifold with1/8"npt pressure switch tap, does not include tailpieces

This part is an Air Injector, Galaxy, Stainless, 3/8" barb, Garden Tub...  Hole Size    5/8"Face Diameter    1-5/8"Manufacturer    Custom Molded ProductsColor    Stainless

This part is a 2.5HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0123 cast into the back and will measure about 3 3/4" wide with an eye width of 1 3/4" and a vane width of 1/2".. This can be found on motors with...