Shop

You are Buying an Approximately 2 1/4" Wide cap  1"slip x 1"slip x 1"slip WaterWay Scalloped Spa Small Diverter Complete Assembly Black Valve.  This Valve can be found on a few brands but is a very rarely used valve... You...

This pump is a Wow High Performance Pump with 1 1/2" x 1 1/2" connections that measure about 2 3/8" across the threads.. It is a 1.0HP 115V 9.0Amp 1.0HP pump with an Air Switch and Cord.. This Vico-Ultrajet range of Hydro-Massage Whirlpool Pumps have...

This Kit is an 1HP Impeller for an Executive 48 Frame Wet End up to 1HP Motor and a 56 Frame Wet End 1HP Motor. This Impeller fits between the Face and the Volute of an Executive Wet End. I would advise replacing the Seal when you replace...

This pump is a 56 frame Motor with a Vico Side Discharge Wet End with 2" Suction and Pressure Threaded fitting that measure about 3" from edge to edge on the threads. This is a 2 Speed pump and the Amerage is 8.0 on high speed and 3.0 on low speed which...

The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end...

This part is a 5 Position 50 Amp Terminal Block found in Balboa Lite Leader Packs and some others..  Terminal Type    Terminal BlockTerminal Style    Terminal Block/StripNumber of Connections    5Terminal...

Thermowell Fitting5/16" t-well, 90° ell pvc

This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a vane width of 1/2".. This can be found on motors with...

This part is a Complete Flo-Master FMCP 1.5HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High...