HTPOFAmerica

Intertek LX 56 Frame Spa Pump 3.5HP 1-Speed 230V 2"x2" WUA-350-I WP-350-I LP-350-I

(No reviews yet) Write a Review
SKU:
ASP56WUA350-I
Shipping:
Calculated at Checkout
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To
  • Compare your screws to be sure that this is the correct wet end.
  • The original pump looks like this...
  • Compare your wet end to this picture to be sure that this is the correct wet end.
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To 2" Suction Side measures 3" across the threads..
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To 2" Pressure Side measures 3" across the threads..
  • Compare your motor shaft to these to be sure...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 1 Speed 230V WUA Video How To
$394.99

Description

This complete 56 Frame hot tub circulation pump delivers 3.5 Horse Power at 11.0 Amp with (1) Speed operation at 230V. Manufactured by Intertek LX, this model typically displays part numbers WUA-350-I, WP-350-I or LP-350-I on its identification label.

Refer to our instructional video content to properly identify this pump model and verify correct fitment for your spa application. Physical dimensions include approximately 7 1/4" across the pump face, 7 3/8" measured from bottom to top of the volute pressure side, and 15" from back edge to front edge. The Suction and Pressure side thread fittings are designated 2" x 2" but actually measure 3" from thread edge to thread edge.

IMPORTANT: This pump assembly shares similar appearance with Aqua-Flo and CMP pump models and is fully interchangeable when replacing the complete pump unit.

If your existing Wet End features a Bleeder Barb and the Bleeder Screws in your original wet end have flat screw drive slots, please verify compatibility before ordering.

View AllClose

Related Products

Related Products