HTPOFAmerica

Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To

(No reviews yet) Write a Review
SKU:
ASP2manifold2+6deadendflexcoupler
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To with (2) Plugs...
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To with (2) Plugs...
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
  • Water Manifold, Base Kit, 2" with (8) 3/4" Outputs & Coupler Video How To
MSRP: $74.50
$43.99
— You save $30.51

Description

See the Informational videos here first. This part is a 2" Spigot X Dead End X (6) 3/4" Barbs + 2" Street x Slip x (2) 3/4" Barb Manifold Basic Replacement Kit. Note: 2"= 2 3/8" in PVC Plumbing. The Kit consists of the Manifold with (6) 3/4" Barbs & a Manifold with (2) 3/4" Barbs, (2) Plugs for 3/4" Barbs, a 2" Coupler, 6' of 2" Soft Pipe. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side which would measure about 2 3/8" OD and then slips inside of the other manifold and then a 2" fitting glues in on the other side that would measure about 2 3/8" ID.
 




View AllClose