Description
This component is a Full FMHP 1.0HP Aqua-Flo wet end assembly featuring 1 1/2" x 1 1/2" ports (measuring approximately 2 3/8" across threaded connections) with side discharge configuration for 48 frame pump systems. This wet end pairs with a 48 frame motor rated at approximately 8.0 Amps at high speed when operating on 230V power or approximately 12 Amps when running on 115V power Compatible with both single and dual speed motors. Discharge orientation can be adjusted 90 degrees for installation flexibility. This complete wet end package contains: volute housing, seal assembly, impeller, wear ring, suction cover, suction cover o-ring, drain plug, drain plug o-ring and mounting screws for suction cover.
Important: Always select your HP rating based on motor amperage using the reference chart below. A 48 frame motor has an approximate diameter of 5 1/2" and features 1/4" thru-bolt heads with approximately 5 3/16" spacing between thru-bolts measured diagonally. In comparison, a 56 frame motor measures roughly 6 1/4" in diameter and uses 5/16" thru-bolt heads with about 5 7/8" diagonal spacing between thru-bolts.
