Sensors Circuit Board

This part is a Standard Balboa Heater M7 Sensor with a 31" wire found in Jacuzzi Premium J series 2016 to current.    Application Balboa Water Group Sensor Diameter 1/4" Wire Length 31" ...

Waterway NEO 2100 ETS Hi-Limit Sensor.   Spa Control Sensor Type Hi Limit Application Waterway Model ETS Connector Type 2 pin Wire Count 2 wire

Waterway NEO 2100 ETS (Electronic Thermal Sensing) Temperature Sensor. Similar to Balboa's M7™ Technology, the NEO 2100 uses (2) ETS sensors to determine the water temperature.     Sensor Application Spa Control Sensor Type...

This part is a GRAY Balboa Temperature Sensor Mount that accommodates 3/8” temperature sensors from Balboa, Gecko, Hydro Quip, and others. 1” hole size required. Thermowell Type Thru-Wall Sensing Bulb Size 3/8" Thru-Wall Hole Size 1"

This part is a Temperature and Hi-Limit Sensor that fits some ACC SmartTouch control systems there is one sensor bulb is 1/4" Diameter and it uses (2) 2-pin connectors.. Fits most ACC Smartouch and Epack control systems regardless of year.

This part is a Temperature and Hi-Limit Sensor that fits some ACC control systems the cable is 20" long and the sensor bulb is 1/4" Diameter and it uses a 2-pin connector.. Fits ACC Smartouch and Epack control systems regardless of year.

This part is an Adapter Kit to convert the new style sensor set for Watkins No-Fault 4000 or 6000 heaters to the old style plugs.. Includes: The Two Adapters only for the Sensors click the link below: Below is a list of related parts click on the links...

This part is a 96" Hi Limit Sensor with the box style connectors.. This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880...

This part is a 22" Hi Limit Sensor with the box style connectors.. This sensor is used with Some Jacuzzi Premium Hot Tubs and the following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750, 800, 1997 850, and 2005+ 880...

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

This part is a Sundance or Jacuzzi Hi Limit with the smaller bulb for 400, 600, 600-S, 750, 95+ with Bypass Heater...

This part is a Direct replacement sensor kit for Watkins No-Fault 4000 or 6000 heater.Includes: Temperature Sensor, Hi-Limit Sensor, and (2) Two rubber O-Rings with newer Style Connectors 2002+.  Sensor Application Spa Control Sensor Type Temp...