Filter Housing Parts

Master Spa Outer filter PMA-R1 for select H2X®, Twilight, and Legend Series™ spas and hot tubs. This Eco Pur Charge product features advanced filtration technologies.   For the part that fits into the center of this filter click this...

Eco Pur Charge filters by Master Spas can help reduce your chlorine usage by up to 75%, while also extending the lifetime of your spa or hot tub. The new Eco Pur Charge Filter is the replacement for all previous Eco Pur Mineral cartridges for Master...

Note: This Item has a new design you will receive the basket pictured in the second picture..The original design is no longer available.. This item is a Waterway Top load style filter basket in Black see specs below for sizing..  Basket...

This part is no longer available in Gray.. We do offer it in Black here: Basket, Skimmer, OEM Waterway Dyna-Flo T/M Low Profile, Black This item is a Waterway Top load style filter basket in Gray see specs below for sizing..      Basket...

This part is a 6 1/4" Top Load Style filter Lid that is found on top off Waterway Pressurized filter housings.. This lid has a Thick O-Ring that seals the lid to the inside lip of the canister as well as a bleeder thumb screw with an o-ring that you use...

This part is a 6 1/4" Top Load Style filter Lid NUT that is found on top off Waterway Pressurized filter housings.. This Nut has a slide lock that locks the nut into place so it can't vibrate loose.. .. The Additional Parts for this lid can be...

This part is a Basket for a Filter housing mounted in a hot tub shell, It is made by Rainbow/Pentair and is Gray in color..  There are tabs on each side at the top that hold a weir in place and they will break off allowing the weir to float out...

This part is an Air Bleed Plug for a Waterway Pressure Filter Canister Lid Top-Load Style.. 3/8"mpt with O-Ring   For other Related Parts Click the Links Below: Filter Nut, Lock Ring, Waterway, Pressurized, Top Mount, 7 1/2" Wide, 6 1/8" Hole...

(25) Tubing Clamps, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Links to related parts: (1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for...

(1) Tubing Clamp, Fits Tubing 3/8" I.D. x 1/2"O.D., Double Wire, for Air System Manifolds, Jet Bodies, Pump Bleeders and other items that 3/8" Barbs..  Self-compensating hose clamp expands/contracts with temperature change Cannot be over/under...

This part is a 10.2oz tube of 100% RTV Silicone Sealer that is specially formulated for hot tub fittings when sealing a fitting to the hot tub shell acrylic or poly... We use this Large tube for jobs like 10-15 fittings, Light Lenses or waterfalls and...