Description
Genuine 1.5HP Impeller designed for Aqua-Flo 48 Frame Side or Center Discharge pump models including FMHP, FMCP, FMVP, and TMCP Series Wet Ends. This impeller is engineered for 1.5HP motors operating at approximately 9.0 Amps on high speed at 230V or 14.0 Amps at 115V. Positioned between the face plate and volute housing of your Aqua-Flo wet end assembly, this component ensures optimal water circulation in your spa system.
Impeller Identification Number: 91693651
Important: We strongly recommend replacing your seal simultaneously with impeller replacement. This impeller requires a PS-200 / HTP35-423-1020 Seal, available separately at Global.
Frame Identification Guide: Distinguish between 48 Frame and 56 Frame wet ends by measuring motor through-bolt spacing. 48 Frame units measure 3 5/8" between bolts (5 3/16" in X pattern) with 1/4" bolt heads, while 56 Frame units measure 4 1/8" between bolts (5 3/4" in X pattern) with 5/16" bolt heads.
Horsepower Reference Note: A 115V motor with 1HP impeller typically draws 11-12.0 Amps on high speed; a 230V motor draws approximately 8.0 Amps on high speed. Consult amperage specifications to verify proper horsepower rating.
Critical Warning: Never install a larger impeller attempting to increase spa power output. Oversized impellers cause motor overheating, premature failure, and damage during high-speed operation. Additionally, impellers feature two different wear ring sizes that must match your specific application.
No returns accepted on this product. Please verify compatibility carefully before ordering. Global offers complete selection of compatible seals and accessories for your spa pump maintenance needs.
