Description
Please note: This component has been discontinued by the original manufacturer. An Aqua-Flo XP3 4.0hp impeller designed for XP3 Pump 2 1/2" x 2 1/2" Wet End serves as a direct substitute for this part.
This closed face impeller was engineered specifically for Waterway Viper circulation systems featuring 2 1/2" intake and discharge ports (approximately 3 9/16" measured across threaded connections). Typically paired with 12amp motors in 4.0 horsepower configurations.
Originally manufactured by Waterway Plastics for their Viper pump series, this 4.0hp rated component requires installation on a thru bolt motor rated at 4.0hp minimum. Compatible wet end must have matching 2 1/2" x 2 1/2" port sizing. Shaft seal purchased separately.
Impeller Type Closed Face
Impeller Diameter OD 3-13/16"
Vane Width ID 7/8"
Eye Diameter OD 2-9/16"
Eye Length 3/4"
Impeller Width OD 1-1/8"
Seal Seat Depth n/a
Shaft Length 1-1/4"
Shaft Diameter OD 5/8"
Seal Seat Diameter OD n/a
Manufacturer Waterway
Pump Application Viper
