Description
The Aqua-Flo CMHP circulation pump delivers superior 24-hour filtration performance for your spa, offering the highest GPM rating available in recirculation pumps. This factory-installed component can be easily replaced by DIY-savvy hot tub owners.
This model features a 48 frame design with 230V configuration and side discharge wet end. Both suction and pressure connections measure 1 1/2 inches with approximately 2 3/8 inch edge-to-edge spacing.
Voltage Verification: Confirm your system voltage by inspecting the pump label (marked 115V or 230V) or locate the white wire connection in your control pack. For 230V systems, the white wire connects to the red leg or #2 leg; for 115V, it connects to the neutral or white AC leg. Always disconnect power at the breaker before performing electrical checks.
For 115V applications, reference part number HTP34-402-1140 instead.
Converting from E-14 Pump? You may require: (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
Gecko's Circ-Master circulation technology revolutionizes continuous filtration, providing unmatched flow rates that enable high-efficiency heating systems and up to 4x better filtration compared to standard models.
Key Product Features:
- 48 frame continuous-duty construction featuring front and rear permanently lubricated ball bearings for extended operational life
- Carbon-graphite self-lubricating seal engineered for non-stop duty cycles
- 1-1/2 inch suction and discharge ports
- Quick release compression fittings simplify installation and servicing
- Available in both 115v and 230v motor configurations
Technical specifications: Equipped with 0.75ohp rated impeller. When operating at 1725 RPM motor speed, output equals 1/15th horsepower.
| Complete Pump Type | Circulation Pump |
| Speed | Single Speed |
