Aqua-Flo Circulation Pump

In this video The Spa Guy shows you how to repair a broken Hot Tub Pump Union without cutting plumbing out and using an Emergency Pump Union Split Nut Kit...      #sparepair #hottubrepair  #thespaguy #spaguy Save Save Save Save...

In this video The Spa Guy shows you how to use a Grundfos Circulation Pump in place of a Laing Circulation Pump... The Spa Guy feels the Grundfos is a better pump and i less money.. Save Save Save Save Save Save Save Save Save Save Save Save Save Save...

Hayward Union Adapter Assembly With this adapter you can convert the old style Hayward 2" Thin Threaded Union to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed the O-ring look...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

You are buying a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or Oring that matches Unions. The Union recieves a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wetend(Pump) Threaded Part on the other side. It will Glue to a 1...

This part is a 1 1/2" Slip X 1 1/2" Pump Union with Gasket or Oring that matches Union. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wet end(Pump) Threaded Part on the...

NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This part is a Standard 1 1/2" Heater or Pump Union Gasket. The gasket is 2 3/8" across and fits unions that have a 1...

Flat Gasket for 1-1/2" Union Pump or Heater, 2-5/16" OD, 1-7/16" , This gasket can be used in conjunction with an o-ring when you need extra room for a tighter seal.

This video is about The Spa Guy showing How To diagnose a FLO Code on a Catalina Spa with Balboa Controls.. it is a similar process on other brands as well...    #sparepair #hottubrepair spaguy #thespaguy Save Save Save Save

This video is about The Spa Guy shows you how he diagnosed a bad Pressure Switch for a FLO Code after the tub was powered up...     #sparepair #hottubrepair Save Save Save Save