Description
The Aqua-Flo by Gecko Circ-Master circulation pump delivers superior 24-hour filtration performance for hot tub owners seeking reliable, continuous operation. This factory-installed component offers straightforward replacement for those comfortable with DIY maintenance.
This unit features a 48 frame design with 115V motor and side discharge configuration. The wet end includes 1-1/2" suction inlet and 1-1/2" pressure outlet, with ports measuring approximately 2-3/8" edge to edge for proper fitment verification.
Voltage Verification Important: Confirm your system voltage before ordering. Check the pump label for 115V or 230V designation, or locate the white wire connection in your control pack. White wire connected to the red leg or #2 position indicates 230V; connection to the neutral or white AC leg confirms 115V. Always disconnect power at the breaker before inspection.
For 230V applications, reference part number HTP34-402-1142 for the corresponding voltage version.
Gecko's Circ-Master technology provides the highest GPM rating among spa recirculation pumps, enabling high-flow heating systems that improve thermal efficiency while delivering up to four times enhanced filtration capacity compared to standard circulation pumps.
Key Performance Features:
- 48 frame continuous-duty motor with front and rear permanently lubricated ball bearings for extended service life
- Carbon-graphite self-lubricating seal engineered for non-stop operation
- 1-1/2" suction and discharge ports
- Quick release compression fittings simplify installation and service procedures
- Available in both 115v and 230v motor configurations
This circulation pump utilizes a 0.75ohp rated impeller. When paired with a motor operating at 1725 RPM, the assembly produces 1/15th horsepower output.
| Complete Pump Type | Circulation Pump |
| Speed | 1 Speed (1-Spd) |
| Motor Voltage | 115V |
| Horsepower | 1/15hp |
| Discharge | Side Discharge |
| Port Size | 1-1/2" |
