Vico Complete Pumps

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs.  Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  For Most brands of hot tub pump motors, for...

This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...

In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor... Save...

This video is about The Spa Guy teaching you How To Turn a Pump Wet End to the Direction You Need it to be in to fit your hot tub... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save

This part is a Rubber Pump Motor Base Vibration Dampener for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base. This motor base mounting pad fits under any 48 frame pumps, and under most 56...

This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the Threaded Side and mounts to the existing Pump Union Body...

This part is a Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2" center to...

This Parts is a NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2" and the lip that fits into the union is 2 5/8" center to...

This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used in most Air Applications on most tubs from the air...

This video is about The Spa Guy showing You How To Remove a Stuck Pump Impeller...This technique is similar for all brands of pumps and motors... Save Save Save Save Save Save Save Save Save Save Save

This part is a Complete 3.0HP Vico Ultimax Brand 56frame 2 Speed Pump. This pump is 12.0Amps High Speed and 3.4Amps on Low Speed It would be considered a 3.0HP pump . Complete Pump Type    Portable Spa PumpSpeed    2 Speed...

This Part is a Complete Vico Ultimax Brand 56frame 2 Speed Pump. This pump is 12.0Amps High Speed and 3.0Amps on Low Speed It would be considered a 3.0HP pump although it is marked 4.0HP. Note: This pump is a great replacement choice for a Power Right...