Description
See the Informational video here first. You are buying a 2" Spigot X (12) 3/4" Barbs manifold Renu Old Style Manifold to New Style Barbed Manifold Retrofit Kit. The Kit consists of a 2" Street x Slip Manifold with (12) 3/4" Barbs, (2) Barb Plug to cut the manifold down to 1 barb if needed, (1) 2" Coupler so you can "Spin It To Win It", 6' of 2" Soft Pipe, (24) 3/4" Clamps, (12) 1/2" Slip/ 3/4" Street x 3/4" Barbs and 48" of Clear 3/4" Tube in Sections so you have about 4" per barb to connect the old soft flex pipe from the previous manifold to the new manifold barbs. When connecting to the old flex pipe you have to determine what size it is... If the outside diameter is 3/4" that is considered 1/2" and will glue inside of the 3/4" clear pipe in this kit.. If they measure 1" outside diameter then you would purple primer and "Spin it to Win it" the included Barbed Couplers... If the outside diameter is 1 1/4" then you would need additional 1" couplers which we offer in our store and you would "Spin it to Win it" the coupler on the old flex pipe then glue the barbed Coupler/Street fitting into the coupler and plumb with 3/4" clear from the barb to the manifold.. The kit is to be used to replace an Old Style Glue in broken manifold and extend the output side tubes and use the included Barbed Couplers to "Spin it to Win it" on the old pipes and then glue the 6" piece of 2" Flex in on one end and then glue the manifold in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side. The list on this manifold Kit is $77.99. This listing features Kit Discount as opposed to buy each piece individually and Free Shipping in the Lower 48. This part used in newer hot tubs. Note: We offer many different Kits in our store with many different configurations and also with glue. We have plenty of these.
Please Choose with Care as We Do Not Accept Returns.
We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part..
