Description
This Kit consists of 6" of 1" Inside Diameter Clear Tubing, (2) Clamps and a 1/2" Coupler..
This Kit is used to convert your 1/2" or 3/4" Jet Body flex pipe connection that is leaking to a more modern outside barb type seal...
You achieve this connection by cutting the old flex pipe and if it is 1/2" which measures about 3/4" Outside Diameter gluing the included coupler on, if it is 3/4" which is 1" Outside Diameter then you would glue inside of the provided 1" clear pipe and gluing the other side of the clear pipe onto the outside of the jet body and adding the worm clamps to each end of the connection..
Note: You will need to heat the clear pipe with a hairdryer or heat gun to stretch it over outside of each connection...
Also always be cautious with the heat around glue the glue is highly flammable..
Watch the video and look at the pictures for more information...
