Shop

SC Series Time Delay FuseIdeal for protection of loads subject to high short circuit currents. Protection to 60 amps

This part is a Complete Jet Internal, Waterway, Poly Jet, 3-3/8" face diameter, Roto, Deluxe Scalloped, Gray... This jet is threaded and the way you remove it is use a flat screw driver and carefully start pulling the edge of the face out on...

This part is a Complete Flo-Master FMCP 1HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High...

This Listing is for a (1) Speed Waterway Executive 56fr 230V 3 HP 2" X 2" Pump. Your sticker may say 4HP but based on the chart it is really a 3HP at 12 Amps. Measure the intake and pressure side threads and match them up before ordering.  This unit...

This part is a Reducing Tee that is 2" Slip x 1/2" Female Pipe Thread x 2" Slip... The 2" Sides receive pipe and fittings that would measures about 2 3/8" OD on each end and a 1/2" Threaded fitting that would measure about 5/8" OD like a spigot or other...

Diehl Time Clock Series 800Panel mount, gray face, 24 hour or 7 day, standard 16 amp rating

This part is a Complete Jet Internal, Pentair, Cyclone, Jet, 5" face diameter, Twin Roto, Textured, Silver.. This will replace Sundance Intelli-Jet LX, 1999-2002   Installation Type Twist Lock Face Diameter 5" Jet Part Type Internal ...

This Pump is a 48Frame 115V 2 Speed with a 1.0 HP Wet End that features a Side Discharge 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 9.5 and low speed is 3.2 Amps....

Manifold/Barb Fitting

Start Capacitor1-7/16"dia x 2-3/4"hgt