Shop

NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® & Sundance® LX...

Applied Computer ControlsStainless steel flo-thru replacement heater assembly. Measures 12-1/2" x 2" and has (2) mounting studs, pressure switch tap at 0 degrees from the heater terminals, external thermowell and a 5.5kW element. Commonly found on the...

This pump is no longer available.. This pump is a Rare Sta-Rite Dura-Jet 2'X 2" Side Discharge 48Fr 230V 3.0HP Pump Complete.. This particular part number does come with a J&J cord so if you have Amp cord or a different style cord you will have to...

This pump is a Watkins 1019801 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need a...

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a Watkins Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 and Wavemaster 8200 on the label. It is about 7 1/4"" across the face of...

This part is a (1) 90 Ell 1 1/2" Street X 1 1/2"Slip with an 1/8" FPT hole in the side.. The 90 ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the other side that would measure 1 7/8" ID on...

This is a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo Wet Ends...

This part is a Bypass Valve Flap made by Waterway found inside of In-Line, Top Load, Top Mount, Front Access, 2" Filter Housings... You will find these in several colors and they will have the numbers 602-5101 or 601-5111 on the valve in most cases....

This part is a 2" Slip x 2" Street 90 Elbow w/thermowell fitting, 5/16" t-well, 90° ell pvc... The 2" fitting measure about 2 3/8" ID on the slip side and 2 3/8" OD on the street side..   PVC Pipe Fitting Type Ell, 90 deg w/t-well Heater...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Watkins Vendor Code 3536 LX Pump Wet End.

This part is a Wear Ring that only fits Watkins LX Vendor Code 3536 Impellers for a 48 or 56 Frame Pump Wet Ends and measures 3/4" thick from front to back... LX Pumps..  

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Watkins Vendor Code 3536 Intertek Brand Pump Wet End only..It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...