Shop

1" Air ControlTop access air Control. Hole size 1-5/8"

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of different brands of tubs and there is a list below of...

Generic anti-microbial replacement for Eco-Pur applications.

Tailpiece, 2"mbt x 1-1/2"s/2"spg, w/Split Nut, Heater   Heater Union Part Type Tailpiece First Plumbing Connection Size 2" First Plumbing Connection Type Male Buttress Thread (mbt) Second Plumbing Connection Size 1-1/2", 2" Second...

This part is a Complete Jet Internal, CMP, Typhoon 500, 5" face diameter, Directional, 5 Scallop, Stainless Steel, Gray... The Waterway 218-6610 Diffuser will not work on this jets though they look similar. Installation Type Snap In Face Diameter 5"...

This part is a Complete Jet Internal, Hydro Air, 3-1/8" Face Diameter, Micro Adjustable,  VSR, Roto, 5 Scallop, Gray... Installation Type Snap In Face Diameter 3-1/8" Jet Part Type Internal Manufacturer HydroAir/Balboa Model Micro...

ThermostatsSingle pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of...

Start Capacitor1-7/16"dia x 3-7/8"hgt

This part is a Jet Internal, CMP Typhoon 200, 2" Face Diameter, Directional, 5 Scalloped, Text, Gray.. Note: This part is no longer available but we will ship a compatible Jet from another brand..  CMP manufactures two jet internal and body systems,...

You are buying a Complete Replacement 4.0KW Heater Assembly that fits a Gecko SSPA or Spa Builders Pack. This Heater Assembly includes the Tub, Element, Pressure Switch, Split nuts and Gaskets. NOTE: If you have the old style SSPA board with the...

Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 3.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 3.0hp (or greater) thru bolt motor. Shaft seal sold...