Shop

This is a 4HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

This is a 4HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/2" Vane width and 4 1/2" OD for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. This Impeller fits between the...

You are buying a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends as well as Waterway " Viper" Wet Ends, The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo...

This part is a Complete CMP Bottom Drain Suction that is VGB Comaptible and requires a 3 5/16" Hole..  Suction Fitting Complete    Complete Assembly, StraightHole Size    3-5/16"Cover Diameter  ...

NOTE: This part is obsolete but we do have an alternative camp that will work but it is Dark Graphite Gray. If you order this Teardrop cap you will get the 6 spoke cap instead.. This part is a Cal Spa 1" Spa Hot Tub Air...

Dimensions 3-1/4”x7”This TSC-8/K-8 control panel will work with most MSPA systems, has 10 buttons including filtration cycle and Economy mode buttons, and will control three pumps and an air blower. It has an LCD display and comes with a 10ft...

This part is a Complete 1 3/4" Face, Jet Assembly, Waterway, Ozone, Swirl Face, 1 1/4" Hole Size, 3/4" Barb, Gray.. 

This part is a Complete 1 3/4" Face, Jet Assembly, Waterway, Ozone, Swirl Face, 1 1/4" Hole Size, 3/4" Barb, Dark Gray.. 

This part is a Complete Jet Assembly, CMP, Ozone, Smooth Face,3" Face, 2" Hole Size, 3/4" Barb, Gray in color.. 

This part is an Impeller for a 48fr Vico Ultima or Ultra Flo, 0.50hp, Jet or Circulation Pump... Closed face impeller made for the Ultima and Ultra Flo spa pumps by Vico/Balboa. Rated at 1/2hp, it is used in an Ultima and/or Ultra Flo pump wet end, and...

This Waterfall or Neck Jet Control Stem is Used in Waterway Top Access 100% shut-off valves 1". This valve has a piece of rubber on the backside to complete the seal..  Click on the links below for related part:  Spa Hot Tub 1" Waterfall or...

You are Buying a 1" Ball Gasket that fits inside of a Waterway air control valve over top of the ball..  NOTE: This listing is for the Gasket only all other items shown are for illustration only and are not included.