Shop

You are Buying a 3 1/4" Wide Dimension One Gray Diverter Cap & O-Ring Kit only. This Diverter Cap screws onto the diverter body threads and Slides over the Diverter Valve Stem is used to operate the Diverter Valve and is for...

You are Buying a 3 1/4" Wide Dimension One White Diverter Cap only. This Diverter Cap Screws on the Diverter Valve and the Stem sticks through the center of the cap is used to operate the Diverter Valve and is for D-1 Spas only. The...

You are Buying a 3 1/4" Wide Dimension One Gray Diverter Cap only. This Diverter Cap Screws on the Diverter Valve body and the Stem sticks through the center of the cap which is used to operate the Diverter Valve and is for D-1 Spas...

This part is a Filter Skimmer Basket that fits a COLEMAN hot tub from about 1994-2008 it is a Snap-In style Top Mount Skim Filter, White, measures about 9 1/4" Outside Diameter to the edge of the outermost lip, Snaps On Top Of Coleman Filter... ...

This item is a 3/4HP Waterway HiFlo Pump Impeller "B" Kit which included the Seal Kit as well.. If Your motor is 115V the amperage would be about 10 Amp if 230V it would be about 7 amps..Closed face impeller made for the HiFlo side discharge...

This Part is a Cal Spa Retrofit M7 Style 5.5KW Heater Complete Assembly includes Tube, Element, M7 Sensors, Split nuts and Gaskets. This unit features a 5,5Kw Element, Tube with (2) M7 Sensors on either end with (2) Split Nuts and gaskets nut you will...

This part is a Cal Spa Original M7 Style 5.5KW Heater Complete Assembly includes Tube, Element Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) Split Nuts and gaskets. This heater replaces the heater inside of the bottom of a Cal...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 2.5hp,which would be 10-11.0 Amps.. Click here for the Seal for this impeller Vico...

Vico, Big Foot Pump Impeller, Found on many different brands but on some Sundance Brand tubs too.. Closed face impeller made for the Big Foot spa pumps by Vico. Rated at 4.0hp,which would be 13-14.0 Amps.. Click here for the Seal for this impeller Vico...

This part is a Complete Heater Tube and Element that fits Vita Spas build by DM Industries.. Stainless steel 5.5kW/230v, 2" x 17-3/4" flow thru replacement heater assembly with a pressure switch tap at 0 degrees from the heater terminals. Includes a...

This part is a Replacement Bottom Drain Fitting Kit found on Artesian and Resort Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by adding the screwing the new face into place. Although this is a complete kit including...

You are buying on a Renu Kit for 1" Street X (4) 3/4" Barbs manifold to be used to replace old manifolds with 3/4 or 1" glue in white pipes. The Manifold recieves a 1" pipe on the slip side which would measure about 1 1/4"...