Shop

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Newer Style Face Plate on an Intertek LX Brand Pump Wet End. Be sure to compare your old plugs to the pictures.. NOTE: This Wet End's parts looks a lot like an Aqua-Flo and a CMP Wet End but...

This Part is an Old Style Plug for a coarse Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses coarse thread bleeder plugs be sure to compare your old plugs to the pictures..  Note: This part Fits...

This Part is a Wet End O-Ring for a 40 or 56 Frame Face Plate for a Intertek LX Brand Pump Wet End only.. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 6 3/8""...

Caldera/Watkins 4.0kw 230v Low Flow Trombone Heater. 26" x 6" dual element w/24" pigtail cord & off angle box w 3/4" barb & pressure switch cord. Used on Caldera Utopia and Paradise Series 2002+. Replaces Laing #6595.1, Caldera/Watkins # 72494...

This 1.0 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Watkins Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 37334-03 on the label for a Watkins Version.  It is about 7 1/4"" across the face of the pump,...

This is a 1.5HP Seal and (2) Bearing Kit & Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an...

This is a 1.5HP Seal and (1) Bearing Kit & Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an...

This is a 1.5-1.65HP Seal Kit & Impeller for Watkins, Vendor # 4081, Wavemaster, 4000, 6000 Pumps. This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers...

  This is a 1HP (1) Bearing, Seal & Impeller Kit with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps at 115V. This Impeller fits...

  This is a 1HP Seal & Impeller Kit with a 2 1/8" Eye with 1/4" Vane Width and 3 7/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps at 115V. This Impeller fits between the Face...

This Listing is for a LX Series WTC50M 230V 1 1/2" Side Discharge 60Hz Circulation Pump that fits the Jacuzzi LX Circulation Pump WTC50M 230V Jacuzzi® Premium Sundance® 1 1/2" Side Discharge 6500-907 Premium and Sundance Hot Tubs. This unit is...

You are Buying a Universal 1" Gray Spa Hot Tub Complete Air Valve Control Kit which includes (1) Air Manifold with (12) 3/8" Barbs, (6) 3/8" Coupler Barbs and 24" of Clear 3/8" Tubing and a 1" Plug for the end of the manifold. If you need more than 1...