Shop

You are buying on a 2 1/2" Heater Split Nut with a Gasket which measures 3 9/16" ID. The Heater Flange Split Nut mounts to the heater tube using 2 screws to hold it in place and screws onto the heater threaded union with a gasket between the union and...

This part is a set of (2) Bearings that fit most motors that are used in hot tubs, this bearing is 17MM ID. Some of the motors this fits are A.O.Smith/Regal Beloit, Century/Regal Beloit, Franklin Electric, General Electric NOTE: Installing bearings...

This Kit features a 5HP Impeller and 1000 Seal with Silicon and a Seal Install Tool that fits an Executive 48 Frame Wet End up to 5HP Motor and a 56 Frame Wet End 5HP Motor. This Impeller fits between the Face and the Volute of an...

This pump is a Jacuzzi J-Pump .75 HP, 48 frame 230V, Single Speed with a J Pump Style Wet End  that measures about 2 15/16" across the threads on both the suction and pressure side connections..  Note: This Pump will Only Work in Jacuzzi J Pump...

This Part is the O-ring used to seal the Temperature Sensor On Sundance and Jacuzzi Brand Hot Tubs Only.. Note: Temperature Sensor is sold separately..  The sensor this O-Ring Fits are used with Some Jacuzzi Premium Hot Tubs and the following...

This part is a 5.5KW UNIVERSAL Heater Complete Assembly includes Tube, Element, Split nuts and Gaskets. This unit features a 5.5Kw Element, Tube with (2) Split Nuts and gaskets.  This heater will work in place of the following heater: 10554 ,...

This part is a Flow Cone Manifold is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This Item is the Flow Cone only but we do offer a kit in our store that features.. This is...

This Flow Cone Manifold Kit is exclusively for HotSpring Hot Tubs made by Watkins and can be found under the name Hotspring, Solana, Tiger River, Caldera... This is Kit consists of a Flow Cone Style Manifold, a 2" Heater Union and gasket, 6" of 2" Flex...

This part is a 5 1/8" Master Spa, Down East or Freedom Spa Jet. This Jet is 5 1/8" across the Face Single. It features a single directional black nozzle.  

This part is a 4" Spa Diverter Black Handle Knob, Gray Cover, Stem and O-Ring Kit that was used on some 1999,2000,2001,2002,2003 Master Spa and Down East Hot Tubs. This Diverter Knob mounts on top of the Diverter Valve Stem Square that is...

This tool is a Clam Shell Style Bearing Puller Clam Shell that you put over the bearing and use a puller to pull the bearing off the pump motor shaft... This tool works on 6203 style bearings only...  Bearing Pullers AdapterWhere bearings are...

 Hot Tub Spa Plumbing Pliers for Unions Fittings that The Spa Guy Talks about in his videos...  These are really Oil Filter Pliers but thats what The Spa Guy Uses and Now You Can Too...