Shop

You are buying a 2" Slip X 2" Slip X (4) 3/4" Ports Manifold open style. This part used in tubs where 3/4" softpipe which measures 1" OD glues inside the ports and goes to the back of each jet in the tub and is plumbed into 2" Pipe which measures 2 3/8"...

You are buying on a 25Amp Pressure Switch Universal Kit that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections and Some Brass Adapters to change the 1/8"mpt connector over to an 1/8" Barb or to a compression...

This part is a (1) 90 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90¡ ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the other side that would measure 1 7/8" ID. It will Glue...

This fitting is a PVC Tee that features (3) 3/8" Barbs that receives a 3/8" ID pipe on all three sides. Note: Colors can vary.. The Smooth Style and Barbed Style both work well with vinyl tubing as in most cases 3/8" tubing in hot tubs is suction not...

This part is a Complete Jet Internal, Waterway, Cluster Storm, 2" face diameter, Twin Roto, Smooth Scallop, Gray...  Note: This is a Cluster Storm Jet by Waterway the CMP Typhoon 200 Series jet looks very similar but they will not interchange.. ...

Aqua-Flo Xp2 Flo-Master 48Frame Pump Face O-Ring Only fits around the Face of a Xp Pump Face exclusively for An Aqua-Flo Xp 48 frame pump which has 2" inlet and outlet which measures about 3" across the threads... If you have a Xp2 56frame 6.1" or 6'3"...

This part is a Balboa Heater M7 Sensor. This Sensor comes with the wire, Connector, and The Screw down cap. It DOES NOT include the tube and the tube side mount. You will normally not need the sensor mount you would reuse it so there is no reason to have...

This part is a Replacement Diffuser for a 2" Cluster Storm Jet made by Waterway. These jet diffusers are removed by pulling the Jet face away from the duffuser and onto the jet face. I also have the replacement jet in this store if you don't have all of...

NOTE: This Jet is No Longer Available Click this Link for the Universal Replacement: Universal Cluster Storm, Jet Internal, Waterway, 2" face diameter, Directional, Textured Scallop, Light Gray   This part is a Complete Jet Internal, Waterway,...

You are buying a (1) 1 1/2" Slip X 1 1/2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1 1/2" fitting which measures 1 7/8" OD on the other side. The inside...

Inside Pipe Repair Glues Inside 2" Pipe and allows a 2" Slip to be glued over or a 1 1/2" Slip to be glued inside. Magic Mend Simply cut the bad fitting off of 2" hard pipe and remove it from the system. Glue the 2" Spigot Street end of the Magicmend...

Barb Adapter 3/4" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/4" ID tube would be glued over the barb.