Shop

This Part is an Old Style Barbed Bleeder Plug that fits some 48 or 56 Frame WUA Intertek LX Brand Pump Wet Ends that use coarse thread bleeder plugs be sure to compare your old plugs to the pictures.. Watch the video for instruction on...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Newer Style Face Plate on an Intertek LX Brand Pump Wet End. Be sure to compare your old plugs to the pictures.. NOTE: This Wet End's parts looks a lot like an Aqua-Flo and a CMP Wet End but...

This Part is an Old Style Plug for a coarse Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses coarse thread bleeder plugs be sure to compare your old plugs to the pictures..  Note: This part Fits...

This Part is a Wet End O-Ring for a 40 or 56 Frame Face Plate for a Intertek LX Brand Pump Wet End only.. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 6 3/8""...

This kit is (1) American Products Luxury Jet Body with a 3/4" slip water fitting and a 3/8" barbed air fitting the kit includes the Flange with Silicon to Install as well. This Jet Body & Flange that fits a 2 5/8" Hole can be found on may...

Caldera/Watkins 4.0kw 230v Low Flow Trombone Heater. 26" x 6" dual element w/24" pigtail cord & off angle box w 3/4" barb & pressure switch cord. Used on Caldera Utopia and Paradise Series 2002+. Replaces Laing #6595.1, Caldera/Watkins # 72494...

This Jet is now obsolete and there is a straight jet left but the number is limited: Jet Internal, Pentair, Luxury, 3-1/2"face diameter,Directional, Hi-Flow, 5 Scallop, Black This part is a Complete Jet Internal, American Products, Luxury, 3-1/2" face...

This kit is (1) American Products Luxury Jet Body Flange with Small Tube of Silicon. This Flange that fits a 2 5/8" Hole can be found on may brands of Hot Tubs but the main brand I find them broken in is a La Spa. I have also seen them in Cal Spa ,...

This 1.0 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Watkins Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 37334-03 on the label for a Watkins Version.  It is about 7 1/4"" across the face of the pump,...

This is a 1.5HP Seal and (2) Bearing Kit & Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an...

This is a 1.5HP Seal and (1) Bearing Kit & Impeller with a 2 1/8" Eye Width and a 5/16" Vane Width and 4" OD for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor that has about 9.0 Amps at 230V. This Impeller fits between the Face and the Volute of an...

This is a 1.5-1.65HP Seal Kit & Impeller for Watkins, Vendor # 4081, Wavemaster, 4000, 6000 Pumps. This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers...