Shop

You are purchasing a Black Mazzei Brand Model 584K Ozone Injector Assembly Complete that is used inline to create suction to pull Ozone Gas from an Ozonator into the Hot Tub water. This Injector can be used in place of the Red Injector 684K. This...

You are buying a Waterway Brand Flapper Tee Air Check Valve with a  1" Slip X 1" Slip Fittings on each end. This valve is used to allow air flow in one direct and to stop water flow in the other direction when plumbed properly in a Hot Tub. The...

This part is a 5.5KW Heater Complete Assembly includes Tube, Element, Metal Case and connecting wires. This unit features a high limit holding tab and a port for the pressure switchThis Heater Fits Cal Spa Hot Tubs and Is a Perfect replacement for the XL...

This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas with 4oz of Christy's Red Hot Blue Glue. These manifolds are found on the left front side of the tub usually...

This kit is a 2" Slip X Dead End X (4) 3/4" Barbs X (1) 3/4" Barb manifold repair kit for freeze damaged Cal Spa or Coleman Spas. The manifolds are found on the left front side of the tub usually and has 4 lines and the drain attached to...

These are now obsolete now click this link for the solution.. You will not need all of these parts but we can't get it without them: Lo-Pro Floor Drain, 3/4" Slip Barb Ell, Dark-Silver-Glitter, 3-1/2" Face Width This part is a Cal Spa Hot Tub...

You are buying a 5.5KW Heater Complete Assembly includes Tube, Element, M7 Sensors, Split nuts and Gaskets. This unit features a 5,5Kw Element, Tube with (2) M7 Sensors on either end with (2) Split Nuts and gaskets. I also offer this heater and tube...

This part is a New Old Style 3 Terminal Power Block found on many Balboa Brand Spa Hot Tub Boards. This terminal Block can get burned on one leg if you can solder you can replace this part and not buy a board if this is the only issue with the...

This item is a CMP Brand LED Single Light Lens that features a 1" wide face and hole size of about 1/2"...      

This part is a Hot Tub 2 3/8" Mini Light Lense Kit with the gasket, Nut, and Light Holder. The face size is 2 3/8" and the hole size is Approx. 1 5/8" to 1 3/4". This fits Artesian Spas and other Brand tubs that have a small light lens. The reason they...

Thsi part is a Standard 5" Hot Tub Light Lense Kit with the gasket, Nut, Light Holder, 12V Bulb and Amp plug wire. The face size is 5" and the hole size is 3 3/4".This fits most tubs that have a large light lens but be sure to measure the hole there are...

This part is a Standard 5" Hot Tub Light Lense Kit with the gasket, Nut, Light Holder & 2.8oz of Silicon. The face size is 5" and the hole size is 3 3/4"and it comes with a tube of Special Silicon to seal the lens when installing. This fits...