Valves All Types Ball, Check, Diverter, etc...

This item is a Black Replacement Diverter Cap for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small o-rings and one O-Ring Gasket that measures about 1 1/2"...

Unibody PVC Gate Valve SPG x SPG

Magicsnap External Valve Lock

Unibody PVC Gate Valve S x SPG

This part is a Drain Cap, Waterway Filter On/Off Valve, 1/2" fght, Water Hose Cap... Note: Colors can vary Black, White or Green Plumbing Connection Size    1/2"Plumbing Connection Type    Garden Hose Thread...

2" Top Access Diverter ValvesAvailable in scalloped or notched style. 3-1/4" hole required

This part is a Gate Valve, 3 piece, 1-1/2" Slip x 1-1/2" Slip, Slice Valve..  3-Piece Gate Valve AssemblyWith plastic paddle. Reliable 3-piece body design allows unrestricted water flow and is easily disassembled for in-line servicing. Internal...

You are Buying a Gray Notched 3 3/4" Spa Diverter Cap only. This is a NON  Buttress Cap if your cap has the word Buttress stamped in it look in our store for a Buttress cap. This Diverter Cap mounts on top of the Diverter Valve with...

This item is a slice valve stem lock keeper to stop 2" Magic Plastics Slice Gate Valves from vibrating shut. Note: This lock will not work on all brands of slice valves because the stem is different lengths on other brands but will work on most.

You are buying on a 1 1/2" Slip X 1 1/2" Slip Slice Gate Valve. The Valve recieves a 1 1/2" pipe or fitting (Which is about 1 7/8" outside diameter) on each side. This part is used in hot tubs to stop the water so you could service the heater or the pump...

You are buying on a 2" Spigot X 2" Slip Slice Gate Valve. The Valve recieves a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on one side and then slips inside of a 2" fitting (Which is about 2 3/8" Outside Diameter) on the other side. This...

This part is a 2" Spigot X 2" Slip Slice Gate Valve. The Valve receives a 2" pipe or fitting (Which is about 2 3/8" Inside Diameter) on one side and then slips inside of a 2" fitting (Which is about 2 3/8" Outside Diameter) on...