Description
This Kit features a 2.5 Horse Power Impeller, (2) Bearing and Seal that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand and are found on Jacuzzi® Premium or Sundance® brand Hot Tubs only.
The pumps this impeller fits usually have the part number 6500-352, 6500-365, 6500-367 And 6500-363 on the label.
Note: Sometimes you have the WUA400-II style part numbers on the pump but if it is a Jacuzzi or Sundance most likely this is the correct impeller..
Another way you can tell which style you have is the spring part of the seal is on the back of the impeller on this style and the spring part is on the volute "back" of the other style...
If you have the other style look for "Guangdong LX pump" in our store..
Watch the video for instruction on how to install this part and also how to determine if this is the correct part.
It is about 4 5/16" across the face edge to edge, it measures about 3 1/16" from the tip of the front to the tip of the sleeve in the back, it also measures 13/32" from the inside of the vane edge to edge.
Some of these impellers have a number on them PPO 109 if yours does this is the correct impeller.. There is only one choice for the Jacuzzi Premium and Sundance pumps...
NOTE: This Wet End looks a lot like an Aqua-Flo, Guangdong LX and a CMP Wet End but they do not interchange see the video for how to tell the difference!
