HTPOFAmerica

Jacuzzi® WUA400 Intertek 1-Speed Spa Pump 56Fr Baseless 2"x2" 230V - Premium Band Mount

(No reviews yet) Write a Review
SKU:
HTP6500-AKL
Shipping:
Calculated at Checkout
  • 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400
  • 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400
  • This part measures over 6 1/2" Wide... 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400
  • 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400
  • 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400
  • Compare your motor shaft to these to be sure...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 Speed 230V WUA400
  • 56Fr Jacuzzi® Intertek Baseless Pump 2" X 2" 1 or 2 Speed 230V WUA400
MSRP: $579.99
$379.99
— You save $200.00

Description

This 56 Frame single-speed complete Intertek circulation pump is designed specifically for Jacuzzi Premium brand spa systems featuring band-style base mounting. Compatible with pumps labeled WUA-400-I, 6500-352, 6500-365, 6500-367, and 6500-363. Pump face diameter measures approximately 7 1/4" across, with a height of roughly 7 3/8" measured from bottom to the pressure side volute top, and extends 15" from rear to front edge. Both intake and discharge port thread fittings are designated as 2" x 2" but actually measure 3" across from thread edge to thread edge.

IMPORTANT: This unit shares similar design characteristics with Aqua-Flo and CMP models and can be swapped when replacing the complete pump assembly!

ALTERNATIVE OPTION: Global also stocks this pump with an integrated base at a lower price point. Minor mounting modifications are required for installation, though all plumbing connections remain identical.

View AllClose

Related Products

Related Products