Hot Tub Parts by Tub Brand

You are purchasing a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (6) Lock Latchs, (6) Strap Repair Buckles and (6) Latch Clip with (18) Screws and (3) Keys that fits the original Factory covers on most Hot Spring, Caldera, Limelight, Hot...

You are purchasing a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (4) Lock Latchs, (4) Strap Repair Buckles and (4) Latch Clip with (12) Screws and (2) Keys that fits the original Factory covers on most Hot Spring, Caldera, Limelight, Hot...

You are purchasing a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (2) Lock Latchs, (2) Strap Repair Buckles and (2) Latch Clip with (6) Screws and (2) Keys that fits the original Factory covers on most Hot Spring, Caldera, Limelight, Hot...

You are purchasing a Watkins Style Hot Tub Spa Cover Strap Latch Repair Kit with (1) Lock Latch, (1) Strap Repair Buckle and (1) Latch Clip with (3) Screws and (1) Key that fits the original Factory covers on most Hot Spring, Caldera, Limelight, Hot...

This part is a Spa Waterfall or Neck Jet 1" Control (1)Large O-Ring only. This 1" Diverter Control O-Ring Kit features (1) O-Ring/Gasket and is about 1 7/16" I.D.   This Part is used in Many Brands of Hot Tubs With 2 3/4" Diverters. ...

This pump is a Wow High Performance Pump with 1 1/2" x 1 1/2" connections that measure about 2 3/8" across the threads.. It is a 1.0HP 115V 9.0Amp 1.0HP pump with an Air Switch and Cord.. This Vico-Ultrajet range of Hydro-Massage Whirlpool Pumps have...

This part is a Cartridge Filter 8" x 7" Wide 2"mpt 32sqft Master Spa Down East Coleman Maax. This filter is 8" long x 7 " Wide and it has a hole in one end that is 5" with lid and a nipple on the other end that is 2". The overall length of this housing...

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Rated at 3.0hp, it is used in the Power-Right 9089X, 9094X, 9121X, PRC504...

Balboa Water GroupStainless steel replacement complete heater assembly, 5.5kW/1.375kW ,230v or 115v, this tube measures  2" Inside Diameter and the overall tube length is 15" not counting the split nuts. This heater includes M7 sensors, tailpieces,...

This is the Ninja whirlpool bath pump from CMP. Used by many tub makers over the years. 115v, 10.0 Amps, comes with air switch and 36" Nema cord. Also available in other amperages. Length Width Discharge Height Overall Height 13.64" 5.35" 6.75" 7...

You are Buying a Black 4" Spa Diverter Handle Knob only. This Diverter Knob mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The Diverter Valve that this part fits is used to...