Hot Tub Parts by Tub Brand

This part is a Large high volume cone shaped bellows Brown in Color... Especially suited for latching air sensors and mechanical sequencing switches. Shipped w/nutMounting hole 7/8" This link is to the same style switch in Beige: Beige, PT1,...

This Laing Circulation Pump is either 115V or 230V with (2) 3/4" Barbs outside diameter. Non-OEM replacement for all models of Watkins® Silentflo® circulation pumps used in Hot Spring, Tiger River & Limelight spas from 1986 to 2012. The Laing...

This parts is an Artesian, Resort Series, Filter, Cartridge, 50sqft, 2" male pipe thread, 6-3/4" Wide, 8" Tall.. Note The small filter found in the center between these filters can be found here.. Artesian, Resort Series, Filter, Cartridge, 6 sqft,...

These have been being obsolete but they are back in production and we are expecting some in the May of 2019.. Watkins Replacement Element Old Style for HotSpring come with a gasket kit as well.. Cap with Thermowell and power cord   ...

TBS 300 Series Air SwitchHas 90 degree 5/16" male quick connect terminals tabs and required panel hole is 5/8".3 ampsSPNOMomentary Function Momentary Air Switch Type Single Pole Normally Open (spno) Model TBS 312 Air Switch Mount 9/16"...

This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 7.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8" across the threads.. There are two barbed fittings on...

This part is a Diverter Kit with a Stem, Silver "S" Style 4 5/16" Long Diverter Handle, Graphite 3 11/16" Graphite Cap & O-ring Kit. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is...

This part is a Reinforced "S" Style 4 5/16" Gray Spa Diverter Handle Knob only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap & O-ring Kit only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide...

This part is a Silver "S" Style 4 5/16" Long Diverter Handle and Graphite 3 11/16" Graphite Cap only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the...

This part is a "S" Style 4 5/16" Silver Spa Diverter Handle Knob only. This Diverter Knob has a S Shaped Top and mounts on top of the Diverter Valve Stem Square that is about 7/16" Wide sticking through the diverter cap. The Diverter Valve...