Hot Tub Parts by Tub Brand

Heater, FloThru, Watkins TR, 15" x 2", 4.0kW, 230v, Generic Note: This heater does not have a Pressure Switch port or studs for the ground bar..   Housing Configuration    StraightHeater Length    15"Lead End Terminal...

This 2.0 Horse Power 230V 10.0/3.0 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA2002C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This part is a Filter Basket found in some older Cal Spas.. Basket Type Skimmer Application Manufacturer Waterway Application Model Top Mount Skimmer Basket Height 5-5/8" Bottom Outside Dimension 5" Top Inside...

This Part is a Retrofit Heater tube to replace the original Cal Spa, Emerald of Polynesian 15 3/4" x 1 1/2" Heater and tube.. includes Tube, Element, Split nuts and Gaskets along with the 1 1/2" to 2" conversion fittings. This generic hot tub heater is...

Brass Fitting that fits an 1/8" MPT Jacuzzi heater fitting on one side a 3/8" ID tube on the other side. I have seen these in Jacuzzi Premium Trombone Heaters to attach the heater to the bleeder system though there are many applications this can be used...

This part is a Bath Style (1) Speed Jacuzzi J-Pump, 115v, J Pump Style Fitting, 7.5A, w/Air Switch...   Note: This pump is equipped with an air switch. If the motor does not start upon plugging it in, the switch may be in the off position. ...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

This Kit fits a 1019801-03 Vendor Code 3536 Watkins 2 HP Pump and Includes an Impeller, Seal, Bearing, Silicon and Seal Installation Tool... It is about 4 1/8"" across the face edge to edge, it measures about 3" from the tip of the front to...

This part is a Pump Bleeder Barb for some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Mpt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

  This Complete Wet End fits a 1019801-03 Vendor Code 3536 2 HP 56 Frame Pump.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also...

This Watkins 1019801-03, 0977601-03 or 39577-03, Vendor Code 3536 2HP Impeller, Seal, Silicon and Seal Installation Tool that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. It is about 4 1/8"" across the face...

This Filter is 14-15/16" wide x 14 7/8" tall it has 2 1/8" holes on the top and bottom.   Application Fountain Valley Spas, Martec/Sonfarrel, Santana, Sonfarrel/Advantage Bottom Physical Dimension 2-1/8" Bottom Style Open Diameter...