_LG__44797__24026.1630826297.jpg?c=2?imbypass=on "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__39428__18934.1630826297.jpg?c=2?imbypass=on "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__43742__09727.1630826297.jpg?c=2?imbypass=on "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__11603__70570.1630826297.jpg?c=2?imbypass=on "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__44797__24026.1630826297.jpg?c=2 "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__39428__18934.1630826297.jpg?c=2 "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__43742__09727.1630826297.jpg?c=2 "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
_LG__11603__70570.1630826297.jpg?c=2 "Impeller, Aqua-Flo, XP2E, 1.5HP for (230V) 9 Amps or (115V) 14 Amps Eye Diamater 2 5/8\"")
Description
This part is an Aqua-Flo XP2 Impeller for a 1.5HP Motor which would have an Amperage Rating of about 9.0Amps on High Speed... It will also be a 56Frame motor which would have a 5/16" head on the through bolts... If you have 1/4" head you probably need the XP2 parts not XP2e they have changed the build of the impellers so the new one may not look exactly like the old one but it will be correct if you chose the correct HP rating based on the HP vs Amperage Chart below..
Note: The replacement impeller received may not have the extra wide back plate pictured, and may be stamped as 2hp. It is still the correct replacement.
Related Parts:
Horsepower VS Amperage Chart
All of these numbers are approximate but will be very close..
115v
.75HP=10Amps
1.0HP= 12Amps
1.5HP=14Amps
2.0HP= 16Amps
230V
1.0HP= 8.0 Amps
2.0HP=10.0 Amps
3.0HP=12.0 Amps
4.0HP=14.0 Amps
5.0HP-16.0 Amps
Impeller Type
| Closed Face | |
| Impeller Diameter OD | 4-1/2" |
| Vane Width ID | 1/2" |
| Eye Diameter OD | 2-5/8" |
| Eye Length | 11/16" |
| Impeller Width OD | 3/4" |
| Seal Seat Depth | 1/8" |
| Shaft Length | 1-1/2" |
| Shaft Diameter OD | 5/8" |
| Seal Seat Diameter OD | 1-1/4" |
| Manufacturer | AquaFlo/Gecko |
| Pump Application | XP2E |
