2” PVC Fittings

This part is a 2" Slip X Dead End X (4) 3/4" Barbs manifold and a single barb plug in case you only need 5 barbs instead of 6. The Manifold receives a 2" pipe on one side and then is a Dead End on the other...

This part is a 2" Slip X Dead End X (4) 3/4" Barbs manifold and a single barb plug in case you only need 3 barbs instead of 4. The Manifold receives a 2" pipe on one side and then is a Dead End on the other...

Coupling, 2" Slip x 2" Slip, Extra Long This fitting accepts pipe or another fitting that would measure about 2 3/8" Outside Diameter on both ends.. (PVC) Plastic Pipe Fittings, Sch 40.   PVC Pipe Fitting Type Coupling, Extra Long ...

Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting

This parts is a Sweep 90 2" Slip X 2" Slip PVC Plumbing Fitting. The Sweep 90 ELL receives a 2" fitting on each side which would measure 2 3/8" ID.. You can Glue any 2" fitting to make a tight plumbing application. AFitting Type Sweep Part Type...

This part is a (1) Sweep 90 2" Street X 2"Slip PVC Plumbing Fitting. The Sweep 90 ELL recieves a 2" fitting on one side which would measure 2 3/8" and then slips into a 2" fitting on the other side. It will Glue into any 2" fitting to make a tight...

This part is a (1) 45¡ 2" Slip X 2"Slip PVC Plumbing Fitting. The 45 ELL receives a 2" fitting on each side which would measure 2 3/8". Any 2" fitting (which measures 2 3/8" outside diameter) will glue into this fitting on both sides to make a...

This part is a 2" Slip Cap 2 3/8" ID glue surface. This cap will glue onto a 2" Fitting which measures 2 3/8" OD.   PVC Pipe Fitting Type Cap First Plumbing Connection Size 2" First Plumbing Connection Type Slip (s)  

This item is a Plug that glues into 2" Slip fittings like manifold ends or tees to plug off the outlet. These fittings would measure 2 3/8" ID and this plug measures 2 3/8" OD.

This part is a 2" Street X 2" Slip X (2) 3/4" Barbs manifold and a single barb plug in case you only need 1 barbs instead of 2. The Manifold receives a 2" pipe on the slip side which would measure about 2 3/8" Outside...

This part is a (1) 90° 2" Slip X 2"Slip PVC Plumbing Fitting. The 90° ELL receives a 2" fitting on each side which would measure 2 3/8" Inside Diameter. Any 2"  fitting (which measures 2 3/8" outside diameter) will glue into this...