PVC Plumbing Fittings

This is a plug used to plug off a 3/8" ID Tube. It wil glue and slip inside of the hose to plug it off. We offer many different plugs based on the brand of manifold.

You are buying a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or Oring that matches Unions. The Union recieves a 1 1/2" pipe or fitting on one side and then Screws to a 1 1/2" Wetend(Pump) Threaded Part on the other side. It will Glue to a 1...

This parts is a Sweep 90 2" Slip X 2" Slip PVC Plumbing Fitting. The Sweep 90 ELL receives a 2" fitting on each side which would measure 2 3/8" ID.. You can Glue any 2" fitting to make a tight plumbing application. AFitting Type Sweep Part Type...

You are buying a (1) 1" Slip X 1" Slip Coupler PVC Plumbing Fitting. The Coupler receives a 1" fitting which measures 1 1/4" OD on one side and then receives a 1" fitting which measures 1 1/4" OD on the other side. The inside diameter of each slip side...

This is a 1/2" Spigot Plug which measures 3/4" OD it is used to plug off a 1/2" port which measures 3/4" ID on a manifold or other fittings.   Note: The Style of this part can vary but they will all be 1/2" Plugs.. 

"Magicmend" Extender FittingFits over the outside 1.5" fitting and allows a new 2" spigot or 1.5" slip connection. PVC Pipe Fitting Type Extender, Outside Fitting Plumbing Repair Fitting Type Extender, Outside Fitting Pvc Pipe Size "A" 1-1/2" Plumbing...

This part is a (1) Sweep 90 2" Street X 2"Slip PVC Plumbing Fitting. The Sweep 90 ELL recieves a 2" fitting on one side which would measure 2 3/8" and then slips into a 2" fitting on the other side. It will Glue into any 2" fitting to make a tight...

This is a 3/4" Spigot Plug which measures 1" OD it is used to plug off a 3/4" port which measures 1" ID on a manifold or other fittings.

This is a 1" Spigot Plug which measures 1 5/16" OD it is used to plug off a 1" port which measures 1 5/16" ID on a manifold or other fittings. PVC Pipe Fitting Type    PlugFirst Plumbing Connection Size    1"First Plumbing...

This part is a Bushing Reducer 3/4" Spigot x 1/2" Slip. This part can be glued into a 3/4" Fitting that would measure 1" ID and a 1/2" OD part which would measure 3/4" will glue inside of the bushing.  PVC Pipe Fitting Type Reducer First...

You are Purchasing (1) 3/4" X 1" Barbed Coupler that fits 1" OD , 3/4" ID Clear Hose on one side and 1 1/4" OD , 1" ID on the other side. These are used for connecting Clear Hoses together in Hot Tubs or pools. We have plenty of these. Buy with caution I...

Barb Adapter 3/8" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/8" ID tube would be glued over the barb.