PVC Plumbing Fittings

This part is a (1) 45¡ 2" Slip X 2"Slip PVC Plumbing Fitting. The 45 ELL receives a 2" fitting on each side which would measure 2 3/8". Any 2" fitting (which measures 2 3/8" outside diameter) will glue into this fitting on both sides to make a...

This part is a 2" Slip Cap 2 3/8" ID glue surface. This cap will glue onto a 2" Fitting which measures 2 3/8" OD.   PVC Pipe Fitting Type Cap First Plumbing Connection Size 2" First Plumbing Connection Type Slip (s)  

This item is a Plug that glues into 2" Slip fittings like manifold ends or tees to plug off the outlet. These fittings would measure 2 3/8" ID and this plug measures 2 3/8" OD.

This part is a 2" Street X 2" Slip X (2) 3/4" Barbs manifold and a single barb plug in case you only need 1 barbs instead of 2. The Manifold receives a 2" pipe on the slip side which would measure about 2 3/8" Outside...

This part is a (1) 90° 2" Slip X 2"Slip PVC Plumbing Fitting. The 90° ELL receives a 2" fitting on each side which would measure 2 3/8" Inside Diameter. Any 2"  fitting (which measures 2 3/8" outside diameter) will glue into this...

You are buying a (1) 90¡ 1 1/2" Street X 1 1/2"Slip PVC Plumbing Fitting. The 90¡ ELL receives a 1 1/2" fitting on one side which would measure 1 7/8" OD and then slips into a 1 1/2" fitting on the other side that would measure 1 7/8" ID. It will Glue...

This fitting is a PVC Tee that features (3) 3/8" Barbs that receives a 3/8" ID pipe on all three sides. Note: Colors can vary.. The Smooth Style and Barbed Style both work well with vinyl tubing as in most cases 3/8" tubing in hot tubs is suction not...

You are buying a (1) 1 1/2" Slip X 1 1/2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1 1/2" fitting which measures 1 7/8" OD on the other side. The inside...

Inside Pipe Repair Glues Inside 2" Pipe and allows a 2" Slip to be glued over or a 1 1/2" Slip to be glued inside. Magic Mend Simply cut the bad fitting off of 2" hard pipe and remove it from the system. Glue the 2" Spigot Street end of the Magicmend...

Barb Adapter 3/4" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/4" ID tube would be glued over the barb.

Inside Pipe Repair Glues Inside 1 1/2" Pipe on both ends. Magic Mend Simply cut the bad fitting off of 1 1/2" hard pipe and remove it from the system. Glue the 1 1/2" size Magic Mend in between two pieces of 1 1/2" ID pipe to mend pipe back together PVC...

This is a plug used to plug off a 3/4" port on Waterway manifolds only to make for example a (6) port manifold a 5 by plugging one.