Description
This Aqua-Flo CMXP circulation pump operates at 230V and serves as a direct replacement for Power Right models installed in select Cal Spas systems. The wet end features 2" X 2" connections with threads measuring approximately 3" edge to edge.
Designed with a 48 frame configuration, this side discharge pump includes a 2" suction inlet and 2" pressure outlet, with thread dimensions of roughly 3" across. The compact design ensures straightforward installation in compatible spa configurations.
Important: Always verify your system voltage before installation. Check the pump label for either 115V or 230V designation. Alternatively, locate the white wire connection in your control pack—if connected to the red leg or #2 leg, your system is 230V; if connected to the neutral or white AC leg, it operates at 115V. For safety, switch off the hot tub breaker before performing any voltage verification.
Pump Brand: Aqua-Flo
Pump Horsepower: 1/15 HP
Pump Voltage: 230 Volt
Pump Model: CMXP2
Amperage: 0.6 Amp
Speeds: 1 Speed
Cord Style: Blank
Discharge Location: Side
Plumbing Size: 2" MBT
