Circulation Pumps Complete

This Impeller and Seal Kit is used ONLY in Intertek WTC50 Pumps Only. The impeller may have the number B432-01, B432-02, B432-03, B432-04, B432-05 on the back. The impeller measures about 3 5/8" across but the size can vary but this impeller is the...

This Seal Set is used ONLY in Intertek WTC50 Pumps Only. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that goes into the impeller is 1 11/32". The Hole in the...

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs.  Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  For Most brands of hot tub pump motors, for...

This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...

In this video The Spa Guy shows you how to repair a broken Hot Tub Pump Union without cutting plumbing out and using an Emergency Pump Union Split Nut Kit...      #sparepair #hottubrepair  #thespaguy #spaguy Save Save Save Save...

In this video The Spa Guy shows you how to use a Grundfos Circulation Pump in place of a Laing Circulation Pump... The Spa Guy feels the Grundfos is a better pump and i less money.. Save Save Save Save Save Save Save Save Save Save Save Save Save Save...

The Hayward Union Adapter Assembly is no longer available With this adapter you can convert the old style Hayward 2" Thin Threaded Union to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you...

This part is a Rubber Pump Motor Base Vibration Dampener for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base. This motor base mounting pad fits under any 48 frame pumps, and under most 56...

This is a 230V Waterway Tiny Might Circulation Pump that is 1" x 1" which measures about 1 7/8" to the outside of the threads. It is high in efficiency and low on power use. Tiny Might packs a not-so-tiny punch. The Tiny Might offers you a great low flow...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

Standard Pump Union Adapter Assembly With this adapter you can convert a 2" Threaded Pump Union whcih measures about 3" I.D. to a 1 1/2" threaded fitting which = 1 7/8" O.D. standard wet end. An O-Ring does come with this fitting but if you just needed...

This 115V Laing E-10 pump with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diameter  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed...