Wet End Pump Parts

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 1.5HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 2.5HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 2.0HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Watkins Vendor Code 3536 Intertek Brand Pump Wet End only..It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...

This is a 2HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 1/4" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.0HP Motor would be about 10.0 Amps on high speed at 230V or 16.0 Amps High Speed at 115V. This Impeller...

This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Jacuzzi Premium or Sundance WUA400 6500 Intertek LX Brand Pump Wet End only.. Watch the video for instruction on how to install this part and also how to determine if this...

This O-Ring  is used on Aqua-Flo Pump Drain Plugs on Xp2, Xp2e, XP3 pumps and more..  Part Type    O-RingCross Section    3/32"Inside Diameter    7/16"id 

This Kit is a Universal Air Bleeder Connect Kit with (1) 1/4" Mpt X 3/8" Barb Plug, (1) 3/8" x 3/8" Barb Coupler, (4") of 3/8" Clear Tubing and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I...

This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...

This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...

This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...