Shop

This filter Fits Some AquaTerra & Freeflow Spas, it is a 40 Square Foot Filter Cartridge that is 5-3/8" Outside Diameter x 9-1/2" in Length and features a 1 1/2" MTP Fine Threaded Male Fitting which measures about 1-3/4" Edge to Edge....

This pump is no longer available.. For the closest pump to replace this click this link: This part is a 115V Center Discharge G&G Olympian Circulation Pump with a 1 1/2" Suction and Pressure side that measures about 2 3/8" Across the threads. This...

This part is a CMP brand Pressurized Filter Cap Bleeder Plug with a Wing Nut handle and O-Ring..

This part is a 15" Heater Tube with a 4.0KW Heater in it that is found in some Jacuzzi Premium J-200 Series tubs and some Sundance 680 & Del Sol tubs as well with a High Flow .. For other parts related to this heater Click the links: Pressure Switch...

This part is a 15" Heater Tube with a 5.5KW Heater in it that is found in some Jacuzzi Premium J-200 Series tubs.. For other parts related to this heater Click the links: Pressure Switch 1/8" mpt 1 Amp Hot Tub Spa Part Universal How To Video HI LIMIT:...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V or 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which...

This part is a Eco Series Hydro-Quip, Eco 5, 4 Button, (1) Pump, Light, Aux, Small Rectangle, 10ft Cord..Spa-Side Control Replacement panel for the Hydro-Quip 6100 and 9100 series control & equipment systems offering consistent high quality...

This part is a 9" Fat Graphite Single Pin pillow with the number 25702-247 in the back of it.. This pillow fits Hydro Spa, Premium Leisure and Platinum Legend and Others. It is 9" long and  It is Graphite in color.  

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.        The button configuration of Blower, Jet, Temp and Light left to right. This Overlay can be used to replace your original...

This is a 3.0HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 7/16" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 3.0HP Motor would be about 12.0 Amps on high speed at 230V.. This Impeller fits between the Face and...

This is a 2.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...

This is a 2.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width and 3/8" Vane width and 4 3/8" OD for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V.. This Impeller fits between the...