Plumbing and Related Parts

This fitting is a PVC Tee that features (3) 3/8" Barbs that receives a 3/8" ID pipe on all three sides. Note: Colors can vary.. The Smooth Style and Barbed Style both work well with vinyl tubing as in most cases 3/8" tubing in hot tubs is suction not...

You are buying a (1) 1 1/2" Slip X 1 1/2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 1 1/2" fitting which measures 1 7/8" OD on one side and then receives a 1 1/2" fitting which measures 1 7/8" OD on the other side. The inside...

Inside Pipe Repair Glues Inside 2" Pipe and allows a 2" Slip to be glued over or a 1 1/2" Slip to be glued inside. Magic Mend Simply cut the bad fitting off of 2" hard pipe and remove it from the system. Glue the 2" Spigot Street end of the Magicmend...

Barb Adapter 3/4" Barb x 1/2" Spigot , The Glue Side glues inside a 1/2" Fitting which would measure 3/4" and a 3/4" ID tube would be glued over the barb.

Inside Pipe Repair Glues Inside 1 1/2" Pipe on both ends. Magic Mend Simply cut the bad fitting off of 1 1/2" hard pipe and remove it from the system. Glue the 1 1/2" size Magic Mend in between two pieces of 1 1/2" ID pipe to mend pipe back together PVC...

This is a plug used to plug off a 3/4" port on Waterway manifolds only to make for example a (6) port manifold a 5 by plugging one.

This part is a (2) 90° 2" Street X 2"Slip PVC Plumbing Fitting. The 90° ELL receives a 2" fitting on one side which would measure 2 3/8" and then slips into a 2" fitting on the other side. It will Glue into any 2" fitting to make a...

Inside Pipe Repair Glues Inside 2" Pipe on both ends. Magic Mend Simply cut the bad fitting off of 2" hard pipe and remove it from the system. Glue the 2" size Magicmend in between two peices of 2" ID pipe to mend pipe back together

You are buying a (1) 45¡ 1 1/2" Street X 1 Slip PVC Plumbing Fitting. The Union glues into a 1 1/2" fitting on one side and then receives the fitting on the other side. It will Glue into any 1 1/2" PVC fitting to make a tight plumbing application...

This item is a 3/4" Slip x 3/4" Slip pvc coupler the inside diameter of the coupler is 1", This is a chart for the outside of your plumbing pipes so you can figure out what size parts to order. Note: The actual size a part is called is not the actual...

This is a plug used to plug off a 3/8" port on Air manifolds or Air Sides of Jet Bodies that are above the water line of the tub. We offer many different plugs based on the brand of manifold.

This part is a Bushing Reducer 2" Street x 1 1/2" Slip converts a 2" glue in fitting into a 1 1/2" Glue In Fitting. For example you can install a 2" manifold in place of 1 1 1/2" Manifold by gluing this on the 1 1/2" pipe and gluing it inside of a slip...