Pumps and Related Parts

This Part is a Complete Vico Ultimax Brand 56frame 2 Speed Pump. This pump is 12.0Amps High Speed and 3.0Amps on Low Speed It would be considered a 3.0HP pump although it is marked 4.0HP. Note: This pump is a great replacement choice for a Power Right...

This item is a 48fr Vico 2" x 2" complete wet end.. It is for a 1.5HP motor which would be about 9.0Amps for 230V and 14.0 Amps for 115V.. Pump to Motor Foot Types 1a Motor Frame 48 Frame Thru-Bolt Drain Plug Location 6 o`clock Suction Auxillary...

This O-Ring fits around the face of an Executive 48 or 56 Frame Wet End all Horsepowers and fitting sizes... This is (1) O-Ring ONLY!! Choose with care, I Do Not accept returns so be sure these are correct before...

This part is a Set of (10) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (8) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (6) Standard 2" Heater or Pump Union Gasket with 2 1/2" Center to Center Lip... The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (4) Standard 2" Heater or Pump Union Gasket with a 2 1/2" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This part is a Set of (3) Standard 2" Heater or Pump Union Gasket with a 2 1/2" center to Center Lip.. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2"...

This Part is a Set of (2) Standard 2" Heater or Pump Union Gasket with a lip that is 2 1/2" Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is...

You are buying a (2) 45° 1 1/2" Street X 1 Slip PVC Plumbing Fitting. The Union glues into a 1 1/2" fitting on one side and then receives the fitting on the other side. It will Glue into any 1 1/2" PVC fitting to make a tight plumbing...

You are buying a (2) 45° 2" Street X 2"Slip PVC Plumbing Fitting. The Union glues into a 2" fitting on one side and then receives the fitting on the other side. It will Glue into any  2" fitting to make a tight...

You are buying a (10) 45° 1 1/2" Street X 1 Slip PVC Plumbing Fitting. The Union glues into a 1 1/2" fitting on one side and then receives the fitting on the other side. It will Glue into any 1 1/2" PVC fitting to make a tight plumbing...