HTPOFAmerica

Intertek LX 3.5HP 2-Speed Hot Tub Pump 56 Frame 2" x 2" 230V WUA-350-II LP-350-II WP-350-II

(No reviews yet) Write a Review
SKU:
ASP56WUA350-II
Shipping:
Calculated at Checkout
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To
  • Compare your screws to be sure that this is the correct wet end.
  • The original pump looks like this...
  • Compare your wet end to this picture to be sure that this is the correct wet end.
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To 2" Suction Side measures 3" across the threads..
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To 2" Pressure Side measures 3" across the threads..
  • Compare your motor shaft to these to be sure...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • When putting your cord back on the new pump note C= Common or the White Wire, L= Low Speed and is usually the Black Wire and rarely the Red Wire, H=High Speed and is usually the Red Wire but occasionally the Black, Green = Ground or the Green wire. They way you can tell if you have it wired correctly is when you power up the pump should go into Low Speed First. If it goes into High Speed you need to power down and reverse the red & black wires and power back up and verify it goes into Low Speed first. If you leave it wrong it will overheat and damage the Hot Tub especially during warm weather...
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To
  • Spa Hot Tub 56Fr Intertek LX Pumps 2" X 2" 3.5HP 2 Speed 230V WUA Video How To
$404.99

Description

This 56 Frame Complete Hot Tub Pump delivers 3.5 Horsepower with dual-speed operation at 11.0/3.5 Amp, manufactured by Intertek LX. Common label markings include WUA-350-II, WP-350-II, or LP-350-II part numbers.

Refer to the instructional video content to properly identify this pump model and verify correct fitment for your spa system. Physical dimensions include approximately 7 1/4" measurement across the pump face, roughly 7 3/8" from base to top of the volute pressure side, and 15" from rear to front edge. The inlet and outlet thread fittings are designated as 2" x 2" sizing, with actual thread-edge to thread-edge measurement of 3".

IMPORTANT: This pump design closely resembles Aqua-Flo and CMP pump models and can be interchanged when replacing the complete pump assembly.

If your existing wet end features a bleeder barb and the bleeder screw heads in your current wet end have a slot for a flat screwdriver, verify compatibility before installation.

This 230V two-speed circulation pump operates reliably for hot tub and spa applications requiring the 56 frame configuration with 2-inch plumbing connections.

View AllClose

Related Products

Related Products